The following table describes the labels in this menu.
LABEL
Active
Enable MAC address filtering to have the router allow or deny access to wireless stations
based on MAC addresses. Disable MAC address filtering to have the router not perform
MAC filtering on the wireless stations.
Filter Action
Define the filter action for the list of MAC addresses in the MAC address filter table.
Select Deny Association to block access to the router, MAC addresses not listed will be
allowed to access the router. Select Allow Association to permit access to the router,
MAC addresses not listed will be denied access to the router.
MAC
Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are
Address
allowed or denied access to the ZyWALL in these address fields.
Click Apply to save your changes back to the ZyWALL.
Apply
Reset
Click Reset to begin configuring this screen afresh.
Wireless LAN Screens
Figure 6-4 MAC Address Filter
Table 6-2 MAC Address Filter
DESCRIPTION
ZyWALL Series Internet Security Gateway
6-7