Table 8-7Dial Backup Setup - ZyXEL Communications ZyWALL 10W User Manual

The following table describes the labels in this screen.
LABEL
Enable Dial Backup
Basic Settings
Login Name
Password
Retype to Confirm
Authentication Type
Primary/ Secondary
Phone Number
Dial Backup Port
Speed
AT Command Initial
String
Advanced Modem
Setup
TCP/IP Options
Priority (Metric)
WAN Screens

Table 8-7Dial Backup Setup

Select this check box to turn on dial backup.
Type the login name assigned by your ISP.
Type the password assigned by your ISP.
Type your password again to make sure that you have entered it correctly.
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when requested by this
remote node.
CHAP - Your ZyWALL accepts CHAP only.
PAP - Your ZyWALL accept PAP only.
Type the first (primary) phone number from the ISP for this remote node. If the
Primary Phone number is busy or does not answer, your ZyWALL dials the
Secondary Phone number if available. Some areas require dialing the pound sign
# before the phone number for local calls. Include a # symbol at the beginning of
the phone numbers as required.
Use the drop-down list box to select the speed of the connection between the
Dial Backup port and the external device. Available speeds are: 9600, 19200,
38400, 57600, 115200 or 230400 bps.
Type the AT command string to initialize the WAN device. Consult the manual of
your WAN device connected to your Dial Backup port for specific AT commands.
Click this button to display the Advanced Setup screen and edit the details of
your dial backup setup.
This field sets this route's priority among the three routes the ZyWALL uses
(normal, traffic redirect and dial backup). Type a number (1 to 15) to set the
priority of the dial backup route for data transmission. The smaller the number,
the higher the priority.
If the three routes have the same metrics, the priority of the routes is as follows:
WAN, Traffic Redirect, Dial Backup.
ZyWALL Series Internet Security Gateway
DESCRIPTION
8-17