40.5.1 Active Protocol
This field is a combination of mode and security protocols used for the VPN. See the web configurator parts
of this User's Guide for more information on these parameters.
Table 40-4 Active Protocol: Encapsulation and Security Protocol
Tunnel
Transport
40.5.2 Security Parameter Index (SPI)
To edit this menu, move the cursor to the Edit Manual Setup field in Menu 27.1.1 – IPSec Setup press
[SPACE BAR] to select Yes and then press [ENTER] to go to Menu 27.1.1.2 – Manual Setup.
FIELD
Active Protocol Press [SPACE BAR] to choose from ESP Tunnel, ESP Transport, AH
Tunnel or AH Transport and then press [ENTER]. Choosing an ESP
combination causes the AH Setup fields to be non-applicable (N/A)
The ESP Setup fields are N/A if you chose an AH Active Protocol.
ESP Setup
SPI (Decimal) The SPI must be unique and from one to four integers ("0" to "9").
VPN/IPSec Setup
MODE
Menu 27.1.1.2 – Manual Setup
Active Protocol= ESP Tunnel
ESP Setup
SPI (Decimal)=
Encryption Algorithm= DES
Key1=
Key2= N/A
Key3= N/A
Authentication Algorithm= MD5
Key= N/A
AH Setup
SPI (Decimal)= N/A
Authentication Algorithm= N/A
Key=
Press ENTER to Confirm or ESC to Cancel:
Figure 40-6 Menu 27.1.1.2: Manual Setup
Table 40-5 Menu 27.1.1.2: Manual Setup
DESCRIPTION
ZyWALL Series Internet Security Gateway
SECURITY PROTOCOL
ESP
AH
EXAMPLE
ESP Tunnel
1234
40-15