ZyWALL Series Internet Security Gateway
The following table describes the labels in this screen.
LABEL
#
Number of an individual static route.
Name
Name that describes or identifies this route.
Active
This field shows whether this static route is active (Yes) or not (No).
Destination
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
Gateway
This is the IP address of the gateway. The gateway is an immediate neighbor of your
ZyWALL that will forward the packet to the destination. On the LAN, the gateway must
be a router on the same segment as your ZyWALL; over the WAN, the gateway must
be the IP address of one of the remote nodes.
Edit
Click a static route index number and then click Edit to set up a static route on the
ZyWALL.
10-2
Figure 10-2 IP Static Route
Table 10-1 IP Static Route
DESCRIPTION
Static Route Screens