Rule Logic Overview - ZyXEL Communications ZyWALL 10W User Manual

ZyWALL Series Internet Security Gateway
This prevents computers on the WAN from using the ZyWALL as a gateway to communicate with
other computers on the WAN and/or managing the ZyWALL.
•
DMZ to LAN
•
DMZ to DMZ/ZyWALL
This prevents computers on the DMZ from communicating between networks or subnets connected
to the DMZ interface and/or managing the ZyWALL.
You may define additional rules and sets or modify existing ones but please exercise extreme caution in
doing so.
If you configure firewall rules without a good understanding of how they work, you
might inadvertently introduce security risks to the firewall and to the protected
network. Make sure you test your rules after you configure them.
For example, you may create rules to:
♦ Block certain types of traffic, such as IRC (Internet Relay Chat), from the LAN to the Internet.
♦ Allow certain types of traffic, such as Lotus Notes database synchronization, from specific hosts on the
Internet to specific hosts on the LAN.
♦ Allow everyone except your competitors to access a Web server.
♦ Restrict use of certain protocols, such as Telnet, to authorized users on the LAN.
These custom rules work by comparing the Source IP address, Destination IP address and IP protocol type of
network traffic to rules set by the administrator. Your customized rules take precedence and override the
ZyWALL's default rules.

12.3 Rule Logic Overview

12.3.1 Rule Checklist
1. State the intent of the rule. For example, "This restricts all IRC access from the LAN to the Internet." Or,
"This allows a remote Lotus Notes server to synchronize over the Internet to an inside Notes server."
2. Is the intent of the rule to forward or block traffic?
3. What direction of traffic does the rule apply to (refer to 12.2)?
4. What IP services will be affected?
12-2
Study these points carefully before configuring rules.
Firewall Screens