Figure 28-8 Menu 11.1: Remote Node Profile; Table 28-5 Menu 11.1: Remote Node Profile (Traffic Redirect Field) - ZyXEL Communications ZyWALL 10W User Manual

ZyWALL Series Internet Security Gateway
Rem Node Name= ?
Active= Yes
Encapsulation= Ethernet
Service Type= Standard
Service Name= N/A
Outgoing:
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Server IP= N/A
To configure traffic redirect properties, press [SPACE BAR] to select Yes in the Edit Traffic Redirect
field and then press [ENTER].

Table 28-5 Menu 11.1: Remote Node Profile (Traffic Redirect Field)

FIELD
Edit Press [SPACE BAR] to select Yes or No.
Traffic
Select No (default) if you do not want to configure this feature.
Redirect
Select Yes and press [ENTER] to configure Menu 11.6 — Traffic Redirect
Setup.
Press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press [ESC] at
any time to cancel.
28.5.1 Traffic Redirect Setup
Configure parameters that determine when the ZyWALL will forward WAN traffic to the backup gateway
using Menu 11.6 — Traffic Redirect Setup.
28-12
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel.

Figure 28-8 Menu 11.1: Remote Node Profile

DESCRIPTION
Route= IP
Edit IP= No
Session Options:
Edit Filter Sets= No
Edit Traffic Redirect= Yes
EXAMPLE
Yes
Remote Node Setup