Log Commands - ZyXEL Communications ZyWALL 10W User Manual

Log Commands

Go to the command interpreter interface (the Command Interpreter Appendix explains how to access and use
the commands).
Step 1.
Use the sys logs load command to load the log setting buffer that allows you to configure
which logs the ZyWALL is to record.
Step 2.
Use sys logs category to view a list of the log categories.
ras> sys logs category
8021x
error
javablocked
cdr
tcpreset
wireless
Step 3.
Use sys logs category followed by a log category to display the parameters that are
available for the category.
Log Descriptions
Chart S-20 RFC-2408 ISAKMP Payload Types
LOG DISPLAY
SIG
NONCE
NOTFY
DEL
VID
Configuring What You Want the ZyWALL to Log
access attack
icmp ike
mten packetfilter
pki tls
upnp urlblocked
Diagram S-1 Displaying Log Categories Example
ZyWALL Series Internet Security Gateway
PAYLOAD TYPE
Signature
Nonce
Notification
Delete
Vendor ID
ipsec
ppp
remote
urlforward
S-21