Figure 20-5 Protocol/Port Report Example; Table 20-5 Protocol/ Port Report - ZyXEL Communications ZyWALL 10W User Manual

20.3.2 Viewing Protocol/Port
In the Reports screen, select Protocol/Port from the Report Type drop-down list box to have the
ZyWALL record and display which protocols or service ports have been used the most and the amount of
traffic for the most used protocols or service ports.
The following table describes the labels in this screen.
LABEL
Protocol/Port This column lists the protocols or service ports for which the most traffic has gone
through the ZyWALL. The protocols or service ports are listed in descending order
with the most used protocol or service port listed first.
Direction This column lists the direction of travel of the traffic belonging to each protocol or
service port listed. Incoming refers to traffic that is coming into the ZyWALL's LAN
from the WAN. Outgoing refers to traffic that is going out from the ZyWALL's LAN to
the WAN.
Amount This column lists how much traffic has been sent and/or received for each protocol or
service port. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies
with the amount of traffic for the particular protocol or service port. The count starts
over at 0 if a protocol or port passes the bytes count limit (see Table 20-7 Report
Specifications).
Log Screens

Figure 20-5 Protocol/Port Report Example

Table 20-5 Protocol/ Port Report

ZyWALL Series Internet Security Gateway
DESCRIPTION
20-9