Configuring Wireless Lan - ZyXEL Communications ZyWALL 10W User Manual

ZyWALL Series Internet Security Gateway
Use the ZyWALL web configurator to configurator to set up your wireless LAN security settings. Refer to
the chapter on using the ZyWALL web configurator to see how to access the web configurator.
6.3.1 WEP
WEP provides a mechanism for encrypting data using encryption keys. Both the AP and the wireless stations
must use the same WEP key to encrypt and decrypt data. Your ZyWALL allows you to configure up to four
64-bit or 128-bit WEP keys, but only one key can be enabled at any one time.
6.4

Configuring Wireless LAN

If you are configuring the ZyWALL from a computer connected to the wireless LAN
and you change the ZyWALL's ESSID or WEP settings, you will lose your wireless
connection when you press Apply to confirm. You must then change the wireless
settings of your computer to match the ZyWALL's new settings.
Click WIRELESS LAN to open the Wireless screen.
Figure 6-3 Wireless
The following table describes the labels in this screen.
6-4 Wireless LAN Screens