Pppoe Encapsulation - ZyXEL Communications ZyWALL 10W User Manual

ZyWALL Series Internet Security Gateway
LABEL
Login Server
Relogin Period
(min)
Next
Back
3.3.2

PPPoE Encapsulation

Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an IETF (Internet
Engineering Task Force) draft standard specifying how a host personal computer interacts with a broadband
modem (for example DSL, cable, wireless, etc.) to achieve access to high-speed data networks. It preserves
the existing Microsoft Dial-Up Networking experience and requires no new learning or procedures.
For the service provider, PPPoE offers an access and authentication method that works with existing access
control systems (for instance, Radius). For the user, PPPoE provides a login and authentication method that
the existing Microsoft Dial-Up Networking software can activate, and therefore requires no new learning or
procedures for Windows users.
One of the benefits of PPPoE is the ability to let end users access one of multiple network services, a function
known as dynamic service selection. This enables the service provider to easily create and offer new IP
services for specific users.
Operationally, PPPoE saves significant effort for both the subscriber and the ISP/carrier, as it requires no
specific configuration of the broadband modem at the subscriber's site.
By implementing PPPoE directly on the ZyWALL (rather than individual computers), the computers on the
LAN do not need PPPoE software installed, since the ZyWALL does that part of the task. Furthermore, with
NAT, all of the LAN's computers will have Internet access.
Refer to the Appendices for more information on PPPoE.
3-4
Table 3-1 Ethernet Encapsulation
This field only applies when you select Telia Login in the Service Type field. Type
the domain name of the Telia login server, for example "login1.telia.com".
This field only applies when you select Telia Login in the Service Type field. The
Telia server logs the ZyWALL out if the ZyWALL does not log in periodically. Type the
number of minutes from 1 to 59 (30 default) for the ZyWALL to wait between logins.
Click Next to continue.
Click Back to return to the previous screen.
DESCRIPTION
Wizard Setup