Electrical Connections - Teledyne 6000B Operating Instructions Manual

Photometric Analyzer
Allow clearance for the door to open in a 90-degree arc of radius 11.75
inches. See Figure 2-2.
2.3
Figure 2-3 shows the Control Unit interface panel. Connections for
power, communications, and both digital and analog signal outputs are
described in the following paragraphs. Wire size and maximum length data
appear in the Drawings at the back of this manual.
Figure 2-3: Interface Panel of the Model 6000B Control Unit
For safe connections, ensure that no uninsulated wire extends
outside of the terminal blocks. Stripped wire ends must insert completely
into terminal blocks. No uninsulated wiring should come in contact with
fingers, tools or clothing during normal operation.
Figure 2-2: Required Front Door Clearance

Electrical Connections

Teledyne Analytical Instruments
Part I: Control Unit
Part I: 2-3