Teledyne 6000B Operating Instructions Manual page 14

Photometric analyzer
Table of Contents

Advertisement

1 Introduction
Power Connection
Analog Outputs
Alarm Connections
RS-232 Port
Remote Bench
Remote Span/Zero
Calibration Contact
Range ID Contacts
Network I/O
Note: If you require highly accurate Auto-Cal timing, use external
Auto-Cal control where possible. The internal clock in the
Model 6000B is accurate to 2-3 %. Accordingly, internally
scheduled calibrations can vary 2-3 % per day.
1-6: Part I
AC power source, 115VAC, 50/60 Hz
0-1 V dc concentration and 0-1 V dc
range ID. Isolated 4-20 mA dc and 4-20
mA dc range ID.
2 concentration alarms and 1 system
alarm.
Serial digital concentration signal output
and control input.
Provides all electrical interconnect to the
Analysis Unit.
Digital inputs allow external control of
analyzer calibration.
To notify external equipment that
instrument is being calibrated and
readings are not monitoring sample.
Four separate, dedicated, range relay
contacts. Low, Medium, High, Cal.
Serial digital communications for local
network access. For future expansion.
Not implemented at this printing.
Teledyne Analytical Instruments
Model 6000B

Advertisement

Table of Contents
loading

Table of Contents