Teledyne 6000B Operating Instructions Manual page 16

2 Installation
AC POWER IN
50/60 HZ
115V
ALARM OUTPUTS
DIGIT AL INPUT SP AN ZERO
CAL. CONT ACT RANGE
ID CONT ACTS RS-232
SOLENOID RETURN
ANALOG OUTPUTS
NET WORK
Figure 2-1: Front Panel of the Model 6000B Control Unit
All operator controls are mounted on the inner control panel "door",
which is hinged on the left edge and doubles as a door to provide access to
the internal components of the instrument. The door will swing open when
the button of the latch is pressed all the way in with a narrow gauge tool
(less than 0.18 inch wide), such as a small hex wrench or screwdriver
2-2: Part I
NPT Fittings
supplied by
customer
3/4" NPT
3/4" NPT
1" NPT
1" NPT
Teledyne Analytical Instruments
0.0 % Anlz
AL-1
Model 6000B
Viewing
Window
Outer Door
Latch