Table of Contents
Advertisement
Thermal Conductivity Analyzer
4.1
Although the Model 2010A is usually programmed to your application at
the factory, it can be further configured at the operator level, or even, cautious-
ly, reprogrammed. Depending on the specifics of the application, this might
include all or a subset of the following procedures:
•
•
•
If you choose not to use password protection, the default password is
automatically displayed on the password screen when you start up, and you
simply press Enter for access to all functions of the analyzer.
4.2
Buttons
Data Entry Buttons: The < > buttons select options from the menu
currently being displayed on the VFD screen. The selected option blinks.
When the selected option includes a modifiable item, the Δ Δ Δ Δ Δ ∇ arrow buttons
can be used to increment or decrement that modifiable item.
Operation
Introduction
Setting system parameters:
•
Establish a security password, if desired, requiring Operator
to log in.
•
Establish and start an automatic calibration cycle, if desired.
Routine Operation:
•
Calibrate the instrument.
•
Choose autoranging or select a fixed range of analysis.
•
Set alarm setpoints, and modes of alarm operation (latching,
fail-safe, etc).
Program/Reprogram the analyzer:
•
Define new applications.
•
Linearize your ranges.
Using the Data Entry and Function
Teledyne Analytical Instruments
Part I: Control Unit
Part I 4-1
Advertisement
Chapters
Table of Contents
