Teledyne 2010A Operating Instructions Manual page 108

Appendix
System Power
Requirements: Ex-Proof Analysis Unit 110 or 220 VAC, 50-
Control Unit: Universal Power 85-250 VAC 47-63Hz.
Cell Material: Nickel plated brass block with nickel alloy
O/P Interface: Full duplex RS-232, implement a subset of
Mounting:
Standard: General purpose flush panel mounting Control
Dimensions:
Control Unit: 6.96"H x 10.8"W x 10.5"D
Analysis Unit: 13.6"W x 18.1"H x 8.25"D
Control Unit: General Purpose Flush Panel Mounting
Analysis Unit: Explosion Proof Enclosure is UL and CSA
Watted Parts: 316SS (except cell) standard version.
A-4
Teledyne Analytical Instruments
60Hz. (Internal Switch selectable)
filaments and stainless steel end plates
Tracs Command
Unit
Bulk Head mount Analysis Unit
Options: General purpose relay rack mounted to con-
tain either one or two in a 19" relay rack
mountable plate
* Other configurations, including a totally
explosion-proof, are available
Listed for Class 1, Division 1, Groups B, C,
D Service. Nema 4/7 rated. (Actual Group
Rating is dependent on options selected)
(Auto-Cal or Gas Panel option include viton
seals. The standard flowmeter includes viton
seals, SS valves, glass metering tube in an
acrylic block).
Model 2010A