Call Features
Changing the DND Settings
See "Using Do-Not-Disturb (DND)" on
To turn on DND using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your Station password followed by #. See
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
To turn off DND using Remote Programming:
Changing the Manual Call Forwarding Settings
See "Manual Call Forwarding" on
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your Station password followed by #. See
5. Dial one of the following Call Forwarding feature codes:
6. Do one of the following to specify a forwarding number:
To turn off Call Forwarding using Remote Programming:
Page 44
•
Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
•
Use any phone on the system.
Station password for your extension.
text (if applicable).
Follow steps
1
-
4
above, dial 371, and then hang up.
•
Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
•
Use any phone on the system.
Station password for your extension.
•
355 (All)
•
356 (No answer)
•
357 (Busy)
•
358 (No Answer/Busy)
•
Enter an extension number.
•
Dial the Outgoing Call access code (8 is the default code), and then dial the
number.
Follow steps
1
-
4
above, dial 355, and then hang up.
page 49
for more information about using DND.
page 40
page 33
for more information about Manual Call Forwarding.
page 40
Mitel
®
5304 IP Phone User Guide – Issue 2, June 2010
for details on setting up a
for details on setting up a