Page 2
Mitel Networks Corporation (MITEL®). The information is subject to change without notice and should not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions of this document or new editions of it may be issued to incorporate such changes.
Table of Contents TIPS FOR YOUR COMFORT AND SAFETY Don't cradle the handset ......................5 Protect your hearing........................5 SUPPORTING DOCUMENTATION ABOUT YOUR PHONE Elements of your phone ......................7 CUSTOMIZING YOUR PHONE CALL HANDLING FEATURES Making and answering calls ...................... 8 Make a call .............................8 Answer a call ............................8 Place a call on Hold..........................8...
Your phone has a control for adjusting the volume of the handset receiver. Because continuous exposure to loud sounds can contribute to hearing loss, keep the volume at a moderate level. Supporting Documentation To access other Mitel phone and peripheral documentation: 1. In your browser, go to http://edocs.mitel.com 2.
5302 IP Phone User Guide About your phone The Mitel 5302 IP Phone is a 2-line, dual port phone with dedicated keys that provide access to the following features: Hold, Transfer and Redial. There are also four programmable keys. The 5302 IP Phone has a speaker for paging purposes;...
5302 IP Phone User Guide Elements of your phone Element Function There are 12 alphanumeric keys: the digits 0-9, * and #. These keys are used 1. Alphanumeric for the following purposes: keypad Entering a directory number (DN) and PIN during start up of an un- initialized set Dialing a number in order to establish an outgoing call.
5302 IP Phone User Guide Customizing your phone The volume of the handset, speaker, and ringer can be changed using the volume up and down keys on the phone (See number 10 and 11 in the above table). Pressing the volume up or down keychanges the volumes as follows: If the handset is on-hook, the ringer volume is adjusted while the set is ringing for an incoming call.
5302 IP Phone User Guide To toggle between calls: Press the flashing line key. The active call is automatically placed on on hold. Transfer a call To Transfer a call: 1. Press (Transfer key). 2. Dial the number of the third party.
5302 IP Phone User Guide Phone Status: Audio/Visual Feedback The status of the 5302 phone is provided by the LEDs and tones played either through the handset or speaker. LED Feedback On (Solid) Blinking slowly Blinking quickly Message / No voice...