Tone; Using The {Tone} Key With On Hook Dial; Using Destination Lists - Savin 2045 Facsimile Reference Manual

Note
❒ You can also register numbers in-
cluding pauses in Destination lists.

Tone

This function allows a machine con-
nected to a pulse dialing line to send
tonal signals (for example if you want
to use a special service on a tone dial-
ing line). When you press the { { { { Tone} } } }
key, the machine dials the number us-
ing tonal signals.
Limitation
❒ Certain services may be unavaila-
ble when using the { { { { Tone} } } } key.
Note
❒ A tone is shown as a "•" on the dis-
play.
Using the { { { { Tone} } } } key with On Hook Dial
A A A A
Press the { { { { On Hook Dial} } } } key.
B B B B
Enter the fax number using the
number keys.
C C C C
Press the { { { { Tone} } } } key.
D D D D
Enter the ID number using the
number keys.

Using Destination Lists

When you program a destination
number into a Destination list, you
can dial the number by just selecting
the destination from the Destination
list.
Additionally, you can store a name
that will appear on the display.
If you frequently send the same mes-
sage to more than one place, program
these numbers into a Group. Then
you can send messages to all the des-
tinations in that Group with just a few
keystrokes. You can also program a
name for the Group (for example,
"Branch Offices"), this will be dis-
played before you press the { { { { Start} } } }
key.
Preparation
In the Destination list, program in-
dividual destinations and/or
groups of destinations. See "Pro-
gramming Address Book", General
Settings Guide.
Dialing
2
33