Mixing Scan Settings For A Multiple; When Placing Originals On The Exposure Glass; When Placing Originals In The Optional Auto Document Feeder (Adf) - Savin 2045 Facsimile Reference Manual

Mixing Scan Settings for a
Multiple Page Original
When sending an original of several
pages, you can select a different im-
age density, resolution, and original
type setting for each page.
Place the original, select the scan set-
tings for the first page, dial, and then
press the { { { { Start} } } } key as you would
normally. Then follow one of the fol-
lowing two procedures.
Note
❒ It is recommended that originals
be placed on the exposure glass
when mixing scan settings for a
multiple page original.
When placing originals on the exposure
glass
Note
❒ While the machine is beeping, you
have about 60 seconds (10 seconds
for Immediate Transmission) to se-
lect density, resolution, and origi-
nal type. The remaining time is
shown on the display.
A A A A
Check which pages you want to
scan with different settings.
B B B B
Remove the previous page and
place the next page.
C C C C
Select the image density, resolu-
tion, and original type.
Note
❒ Adjust the settings for each
p a g e b e fo re y o u p r es s t h e
{ { { { Start} } } } key.
When placing originals in the optional
Auto Document Feeder (ADF)
Note
❒ Depending on what time the scan
settings are adjusted, the settings
may not be reflected in the result-
ing operation.
A A A A
Check which pages you want to
scan with different settings.
B B B B
Select the image density, resolu-
tion, and original type before the
next page is scanned.
Scan Settings
2
31