Table of Contents
Advertisement
❖ ❖ ❖ ❖ Mixed Original Sizes
Select this to individually scan the
size of originals loaded in the ADF.
For example, when A4 and B4 JIS
size originals are sent together,
usually all are sent using the size of
the first original. By selecting
Mixed Original Sizes, the machine
scans and sends each document ac-
cording to its size.
Note
❒ To cancel the selected scan area,
select [Auto Detect]. See p.16
"Specifying Auto Detect".
❒ When using the Mixed Original
Sizes, the machine sends the
originals by memory transmis-
sion.
❒ When using the Mixed Original
Sizes, rotation transmission is
disabled. See p.73 "Transmis-
sion with Image Rotation", Fac-
s i m i l e R e f e r e n c e < A d v a n c e d
Features> .
A A A A
Place the originals, and then se-
lect any scan settings you require.
Note
❒ When placing different size
originals into the ADF, adjust
the document guide to the larg-
est original.
❒ Small-size originals may be sent
at a slight slant since they do not
match the document guide.
B B B B
Press [Scan Area].
The Scan Area menu is shown.
C C C C
Select the scan area.
Note
❒ To cancel the selected scan area,
select [Auto Detect]. See p.16
"Specifying Auto Detect".
Specifying standard sizes
A Press [Regular].
B Press the size of the originals
to be sent, and then press [OK].
C Press [OK].
The selected size is shown
above the highlighted [Scan Ar-
ea].
Placing Originals
2
15
Advertisement
Table of Contents
