Table of Contents
Advertisement
Faxing
❒ You can have the machine return
to the resolution default setting af-
ter every transmission, with [Text
Size Priority] under [Gen. Settings/Ad-
just]. See p.130 "General Set-
tin gs /Adjus tment", Facsimile
Reference <Advanced Features> .
A A A A
2
Press [Resolution].
B B B B
Select the resolution you require,
and then press [OK].
Note
❒ If you install the optional ex-
pansion memory, "Super Fine"
will be displayed in the Resolu-
tion box.
28
Original Type
If your original contains photo-
graphs, illustrations, or diagrams
with complex shading patterns or
grays, select the appropriate original
type to optimize image clarity.
❖ ❖ ❖ ❖ Text
Select [Text] to send high-contrast
black-and-white image originals.
Use this setting even if your origi-
nal contains text and photographs,
or if you only want to send clearer
text.
❖ ❖ ❖ ❖ Text/Photo
Select [Text/Photo] to send an origi-
nal containing both a high-contrast
black-and-white image, such as
text, and a halftone image, such as
a photograph.
❖ ❖ ❖ ❖ Photo
Select [Photo] to send an original
containing a halftone image, such
as a photograph or a color original.
Note
❒ If you select [Text/Photo] or [Photo],
the transmission will take longer
than when [Text] is selected.
❒ If you send a fax message with
[Text/Photo] or [Photo] and the back-
ground of the received image is
dirty, reduce the density setting
and resend the fax. See p.29 "Im-
age Density (Contrast)".
❒ You can set the original type that is
selected right after the machine is
turned on or modes are cleared,
with [Scan End Reset] under [Gen.
Settings/Adjust]. See p.130 "General
Settings/Adjustment", Facsimile
Reference <Advanced Features> .
Advertisement
Table of Contents
