Dialing; Number Keys; Pause - Savin 2045 Facsimile Reference Manual

Faxing

Dialing

There are two main ways to dial a
number:
❖ ❖ ❖ ❖ Number Keys
p.32 "Number Keys"
2
❖ ❖ ❖ ❖ Quick Dials
p.33 "Using Destination Lists"
This section covers these functions
and others in more detail.
Note
❒ The display shows the percentage
of free memory space for storing
originals. Since fax numbers are
programmed in separate memory,
dialing fax numbers using the
number keys does not change the
percentage on the display.

Number Keys

Enter numbers directly using the key
pad on the right side of the control
panel.
Note
❒ Maximum length of a fax number:
128 digits.
❒ You can insert pauses and tones in
a fax number. See p.32 "Pause",
p.33 "Tone".
A A A A
Enter the fax number using the
number keys.
32
Note
❒ If you make a mistake, press the
{ { { { Clear/Stop} } } } key, and then enter
again.
❒ If the optional extra G3 interface
unit is installed, select G3 before
you proceed to the next step.
See p.53 "Changing the Line
Port", Facsimile Reference <Ad-
vanced Features> .

Pause

Press the { { { { Pause/Redial} } } } key when di-
aling or storing a number to insert a
pause of about two seconds.
Note
❒ You cannot insert a pause before
the first digit of a fax number. If
you press the { { { { Pause/Redial} } } } key at
the first digit, a redial occurs. See
p.43 "Redial", Facsimile Reference
<Advanced Features> .
❒ A pause is shown as a "-" on the
display.