Monarch; Pdt - HP Integrity rx4640 User's & Service Manual

Utilities
EFI/POSSE Commands
Parameters
none
Example C-14 lanaddress Command
LAN Address Information:
LAN Address
-----------------
Mac(00306E4C4F1A)
*Mac(00306E4C0FF2)

monarch

Displays or modifies the ID of the bootstrap processor. The preferred monarch number is stored in NVM.
Syntax
monarch <cpu>
Parameters
<cpu> specifies a cpu
Operation
If specified with no parameters, monarch displays the Monarch processor for the server. Specifying a
processor number alters the preferred Monarch processor. None of these changes takes affect until after a
reboot.
Example C-15 monarch Command
Shell> monarch
Current Preferred
Monarch Monarch
------- ---------
0 0
0 0
To view monarch: fs0 :\ monarch
| Processor
-----------------+-----------
current status |
next boot status |
To set the monarch processor to 1: fs0 :\ monarch 1
| Processor
-----------------+-----------
current status |
next boot status |

pdt

Displays or clears the contents of the Page Deallocation Table.
178
Path
----------------------------------------
Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E4C4F1A))
Acpi(HWP0002,100)/Pci(2|0)/Mac(00306E4C0FF2))
Possible Warnings
-----------------
0
0
0
1
Appendix C