Safety Information - Fluke 8062A Instruction Manual

This meter has been designed and tested in accordance with IEC Publication
348. To ensure that the meter is used safely, follow all safety and operating
instructions in this manual. If the meter is not used as described in this man-
ual, the safety features of the meter might be impaired.
Do not use the meter if the meter or test leads look damaged, or if you
suspect that the meter is not operating properly.
Turn off power to the circuit under test before cutting, unsoldering, or
breaking the circuit. Small amounts of current can be dangerous.
Do not apply more than 500V rms between a terminal and earth ground.
Use caution when working above 60V dc or 30V ac rms. Such voltages
pose a shock hazard.
When using the probes, keep your fingers behind the finger guards on
the probes.
Disconnect the live test lead before disconnecting the common test lead.
Symbols
The following international symbols are used in this manual:
Important Safety Information in Manual
AC
DC
Diode Test
Ground
Fuse
Indicates Terminals At Which Dangerous Voltages May Exist
Battery

Safety Information