Fluke 8062A Instruction Manual page 29

Table 2-1. Controls, Indicators and Connectors
Item Name
No.
1W* Battery Eliminator
Connector
2 Function Buttons:
3 Battery
Compartment and
Cover
4 V S Input
Connector
5 COMMON Input
Connector
6 A Input Connector
7 Function
Switches: A,V,
8 AC/DC Function
Switch
9 Range Switches
* For safe operation, fully insert the A81.
External input power connector for use with
the A81 Battery Eliminator accessory.
Push buttons that toggle on or toggle off the
, REL 'secondary functions: visible or audible
continuity, or relative. These functions are
selected in conjunction with the primary
measurement functions (see items 7 and 8).
Cover for the 9V battery and the current fuse
F1.
Protected test lead connector used as the
high input for all voltage, resistance, and
continuity measurements. All test lead
connectors accept standard or safety-
designed banana plugs.
Protected test lead connector used as the
low or common input for all measurements.
Protected test lead connector used as the
high input for current measurements.
Interlocked switches that are used in
, conduction with the input connectors to
select the measurement functions. Pushing
one switch releases the other, or both may
be pushed together.
Push-on/push-off switch is used to select ac
or dc for current or voltage measurements.
(Does not affect selection of diode test or
resistance functions).
Interlocked switches that are used to select
ranges. Pushing a switch selects the
corresponding range and released other
switch depressions. Also used to select
conductance and the diode test.
Operation Instructions
Physical Features
Function
2
2-7