Safety Information; Symbols - Fluke 287C Calibration Manual

287/289
Calibration Manual

Safety Information

To avoid possible electric shock or personal injury, use this
Meter only as specified in this manual or the protection
provided by the Meter might be impaired.
Read the "Safety Information" page before servicing this product.
In this manual, a Warning identifies conditions and actions that pose hazard(s) to the
user; a Caution identifies conditions and actions that may damage the Meter or the test
instruments.

Symbols

International symbols used on the Meter and in this manual are explained in Table 1
Symbol


X

R
P




~

2
Description
AC (Alternating Current or Voltage)
DC (Direct Current or Voltage)
Hazardous voltage
Battery (Low battery when shown on
the display)
Continuity test or continuity beeper
tone
Conforms to European Union
directives
Consult user documentation.
Measurement Category II is applicable to test and measuring circuits connected directly to
utilization points (socket outlets and similar points) of the low-voltage MAINS installation.
Measurement Category III is applicable to test and measuring circuits connected to the
distribution part of the building's low-voltage MAINS installation.
Measurement Category IV is applicable to test and measuring circuits connected at the
source of the building's low-voltage MAINS installation.
This product complies with the WEEE Directive (2002/96/EC) marking requirements. The
affixed label indicates that you must not discard this electrical/electronic product in domestic
household waste. Product Category: With reference to the equipment types in the WEEE
Directive Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted municipal waste. Go to
Fluke's website for recycling information.
Conforms to relevant South Korean EMC Standards.
XWWarning
Table 1. Symbols
Symbol
Fuse

T
Double Insulated
W
Important Information; refer to manual

Earth ground
Conforms to relevant Canadian and US
$
standards
Conforms to relevant Australian Safety

and EMC standards.
Description