Fluke 8062A Instruction Manual page 38

8062A
Instruction Manual
Current (A)
1. Select a range.
2. Set AC/DC switch out
for DC, in for AC.
3. Push both switches at the same
time to select current function.
4. Ensure all other switches are out.
5. Connect the test leads as shown.
6. Heed the input overload limits (Table 2-2)
and connect the test leads to the circuit being
measured.
7. Read the measured value on the display.
2-16
Figure 2-10. Current Operation
High (+)
Low (-)
dy11f.eps