Understanding The Image Version String - Extreme Networks ExtremeWare 7.2e Installation And User Manual

Software Upgrade and Boot Options
indicated, the next selected boot-up image space is used. This is the primary image space by default,
but it can be changed with the following command:
use image [primary | secondary]

Understanding the Image Version String

The image version string contains build information for each version of ExtremeWare. You can use
either the
show version
your switch.
Depending on the CLI command, the output is structured as follows:
•
show version
Version <major>.<sub_major>.<minor> (Build<build>) {[branch | beta | tech |
patch]{<image_version>}.<image_description>-r<branch_revision>}
•
show switch
<major>.<sub_major>.<minor>b<build>{[branch | beta | tech |
patch]{<image_version>}.<image_description>-r<branch_revision>}
Table 44 describes the image version fields.
Table 44: Image version fields
Field Description
major Specifies the ExtremeWare Major version number.
sub_major Specifies the ExtremeWare Sub-major version number.
minor Specifies the ExtremeWare Minor version number.
build Specifies the ExtremeWare build number. This value is reset to zero for each new Major and
Minor release.
image_version Identifies the Technology Release or Beta image version.
The image version number is zero for all but Technology Releases and Beta releases.
image_description Identifies a specific Patch, Beta Release, Technology Release, or Development Branch
Release.
branch_revision Indicates an incremental build on a specific branch.
The branch revision number is zero for General Availability and Sustaining releases.
Table 45 displays sample
Table 45: Sample show output
Release Type Show Version Command
Major
Version 7.0.0 (Build 61)
Minor
Version 7.0.1 (Build 4)
Sustaining
Version 7.0.0 (Build 68)
Patch
Version 7.0.0 (Build 61) patch.030131-01-r1 7.0.0b61 patch.030131-01-r1
Technology
Version 7.0.0 (Build 68) tech2.ipv6-r4
318
or command to display the ExtremeWare version running on
show switch
and
show version show switch
output for various ExtremeWare versions.
Show Switch Command
7.0.0b61
7.0.1b4
7.0.0b68
7.0.0b68 tech2.ipv6-r4
ExtremeWare 7.2e Installation and User Guide