configure ospf vlan <vlan name> timer <retransmit interval>
You can configure the following parameters:
• Retransmit interval—The length of time that the router waits before retransmitting an LSA that is
not acknowledged. If you set an interval that is too short, unnecessary retransmissions will result.
The default value is 5 seconds.
NOTE
The OSPF standard specifies that wait times are equal to the dead router wait interval.
OSPF Configuration Example
Figure 49 is an example of an autonomous system using OSPF routers. The details of this network
follow.
Figure 49: OSPF configuration example
Area 0
Headquarters
ABR 2
160.26.25.1
160.26.25.2
Area 5
ExtremeWare 7.2e Installation and User Guide
IR 2
10.0.1.1
10.0.3.2
10.0.3.1
160.26.26.1
Virtual link
160.26.26.2
Chicago
10.0.1.2
10.0.2.2
ABR 1
10.0.2.1
161.48.2.2
161.48.2.1
Area 6 (stub)
OSPF Configuration Example
IR 1
Los Angeles
EW_018
243