Extreme Networks ExtremeWare 7.2e Installation And User Manual page 269

Configuring the Summit 400 using ExtremeWare Vista
Figure 61: OSPF Virtual Links
Configure OSPF Authentication
The final section in the OSPF configuration window allows you to configure an interface. This section is
shown at the bottom of Figure 62. The table displays the interface and whether an interface type is
currently configured. The configuration box allows you to specify a simple authentication password of
up to eight characters, or a Message Digest 5 (MD5) key for the interface. If you choose MD5, select a
numerical ID between 0 and 255, then select a key value between the range of 0 to 65,535.
ExtremeWare 7.2e Installation and User Guide 269