Switch Protection; Routing Access Profiles - Extreme Networks ExtremeWare 7.2e Installation And User Manual

Security
Where <url> is the DNS name of the switch. For example,
t makes the switch send DNS responses back to the netlogin clients when a DNS
network-access.ne
query is made for
network-access.net
To configure the network login redirect page, use the following command:
configure netlogin redirect-page <url>
Where defines the redirection information for the users once logged in. This redirection
<url>
information is used only in case the redirection info is missing from RADIUS server. For example,
configure netlogin base-url http://www.extremenetworks.com
after they get logged in.
To enable or disable the network login session refresh, use one of the following commands:
enable netlogin session-refresh {<minutes>}
disable netlogin session-refresh
Where ranges from 1 - 255. The default setting is 3 minutes.
<minutes>
session-refresh {<minutes>}
interval.
Session -refresh
To enable or disable network login logout privilege, use one of the following commands:
enable netlogin logout-privilege
disable netlogin logout-privilege
This command turns the privilege for netlogin users to logout by popping up (or not popping up) the
logout window.
Logout-privilege
To enable or disable network login, use one of the following commands:
enable netlogin [web-based | dot1x]
disable netlogin [web-based |dot1x]
By default netlogin is enabled.
To show all network login parameters, use the following command:
show netlogin

Switch Protection

Switch protection features enhance the robustness of switch performance. In this category are the
following features:
•

Routing Access Profiles

• Denial of Service Protection
Routing Access Profiles
Routing access profiles are used to control the advertisement or recognition of routing protocols, such as
RIP or OSPF. Routing access profiles can be used to 'hide' entire networks, or to trust only specific
sources for routes or ranges of routes. The capabilities of routing access profiles are specific to the type
of routing protocol involved, but are sometimes more efficient and easier to implement than access lists.
160
.
makes the logout window refresh itself at every configured time
is disabled by default.
is enabled by default.
configure netlogin base-url
redirects all users to this URL
enable netlogin
ExtremeWare 7.2e Installation and User Guide