Extreme Networks ExtremeWare 7.2e Installation And User Manual page 273

Configuring the Summit 400 using ExtremeWare Vista
Use the Unconfigure button to reset the global RIP parameters to the default values. Use the Submit
button to submit the changes to the system.
Figure 65: RIP Global Configuration
For more information about setting RIP parameters globally, see "Overview of RIP" on page 233.
Configure RIP for an IP interface
Following the global configuration section is for configuring RIP for an individual IP interface. Figure 66
shows an example of this section of the window.
ExtremeWare 7.2e Installation and User Guide 273