Extreme Networks ExtremeWare 7.2e Installation And User Manual page 191

To display more detailed EAPS status information, use the following command:
show eaps {<name>} {detail}
If you enter the
summary of status information for all configured EAPS domains. You can use the
display more detailed status information.
NOTE
The output displayed by this command depends on whether the node is a transit node or a master
node. The display for a transit node contains information fields that are not shown for a master node.
Also, some state values are different on a transit node than on a master node.
The following example of the
information for a transit node. Table 34 describes the fields and values in the display.
EAPS Enabled: Yes
Number of EAPS instances: 1
EAPSD-Bridge links: 2
Name: "eaps1" (instance=0)
State: Links-Up
Enabled: Yes
Primary port: 10
Secondary port: 20
Hello Timer interval: 1 sec
Preforwarding Timer interval: 6 sec
Last update: From Master Id 00:04:96:14:46:B0, at Wed Jan 28 15:38:16
2004
EAPS Domain has following Controller Vlan:
Vlan Name
"cvlan"
EAPS Domain has following Protected Vlan(s):
Vlan Name
"pvlan"
Number of Protected Vlans: 1
Table 34: show eaps Display Fields
Field
EAPS Enabled:
Number of EAPS instances:
EAPSD-Bridge links:
Name:
(Instance= )
ExtremeWare 7.2e Installation and User Guide
command without an argument or keyword, the command displays a
show eaps
show eaps {<name>} {detail}
[Running: Yes]
Mode: Transit
Port status: Up
Port status: Up
Fail Timer interval: 3 sec
VID
0100
VID
0200
Description
Current state of EAPS on this switch:
• Yes—EAPS is enabled on the switch.
• No—EAPS is not enabled.
Number of EAPS domains created. The maximum number of EAPS
domains per switch is 64.
The total number of EAPS bridge links in the system. The maximum
count is 4096. Each time a VLAN is added to EAPS, this count
increments by 1.
The configured name for this EAPS domain.
The instance number is created internally by the system.
command displays detailed EAPS
Tag status:Tagged
Tag status:Tagged
QosProfile
QP8
QosProfile
QP1
Configuring EAPS on a Switch
keyword to
detail
191