Switch - Extreme Networks ExtremeWare 7.2e Installation And User Manual

Using ExtremeWare Vista on the Summit 400
Bad Routes
Figure 93: RIP Statistics

Switch

Use this window to locate hardware status information. As shown in Figure 94, the Hardware Status
table provides data about the following areas:
System Name—Summit 400-48t
MAC Address—MAC address of the device
Software Image Selected—Primary or secondary image and version number of the image
Software Image Booted—Actual image running
Configuration Selected—Either primary or secondary
Configuration Booted—Either primary or secondary
Primary Configuration—File size, date and time of the download
Secondary Configuration—File size, date and time of the download
Switch Temperature—Either normal or over, for over-temperature
Internal Power Supply—Power supply information. If at full capacity it is displayed in green. If it
installed but not operating, it is displayed in red.
302 ExtremeWare 7.2e Installation and User Guide