Extreme Networks ExtremeWare 7.2e Installation And User Manual page 193

Table 34: show eaps Display Fields (Continued)
Field
Fail Timer interval:
Failtimer expiry action:
Preforwarding Timer interval:
Last update: 1
EAPS Domain has ... Controller Vlans:
EAPS Domain has ... Protected Vlans:
Number of Protected Vlans:
1. These fields apply only to transit nodes; they are not displayed for a master node.
2. This list is displayed when you use the detail keyword in the show eaps command.
ExtremeWare 7.2e Installation and User Guide
Description
The configured value of the timer in seconds, specifying the time that
the master node waits before the failtimer expires.
Displays the action taken when the failtimer expires:
• Send-alert—Sends a critical message to the syslog when the
failtimer expires.
• Open-secondary-port—Opens the secondary port when the failtimer
expires.
Displays only for master nodes.
1
The configured value of the timer. This value is set internally by the
EAPS software.
Displayed only for transit nodes; indicates the last time the transit node
received a hello packet from the master node (identified by its MAC
address).
Lists the assigned name and ID of the control VLAN.
2 Lists the assigned names and VLAN IDs of all the protected VLANs
configured on this EAPS domain.
The count of protected VLANs configured on this EAPS domain.
Configuring EAPS on a Switch
193