Secure Shell 2 (Ssh2); Enabling Ssh2 For Inbound Switch Access - Extreme Networks ExtremeWare 7.2e Installation And User Manual

attempting to administer the switch. TACACS+ is used to communicate between the switch and an
authentication database.
NOTE
You cannot use RADIUS and TACACS+ at the same time.
You can configure two TACACS+ servers, specifying the primary server address, secondary server
address, and UDP port number to be used for TACACS+ sessions.

Secure Shell 2 (SSH2)

Secure Shell 2 (SSH2) is a feature of ExtremeWare that allows you to encrypt Telnet session data
between a network administrator using SSH2 client software and the switch, or to send encrypted data
from the switch to an SSH2 client on a remote system. Image and configuration files may also be
transferred to the switch using the Secure Copy Protocol 2 (SCP2). The ExtremeWare CLI provides a
command that enable the switch to function as an SSH2 client, sending commands to a remote system
via an SSH2 session. It also provides commands to copy image and configuration files to the switch
using the SCP2.
The ExtremeWare SSH2 switch application is based on the Data Fellows
It is highly recommended that you use the F-Secure
corporation. These applications are available for most operating systems. For more information, see the
Data Fellows website at:
http://www.datafellows.com.
NOTE
SSH2 is compatible with the Data Fellows SSH2 client version 2.0.12 or above. SSH2 is not compatible
with SSH1.
The ExtremeWare SSH2 switch application also works with SSH2 client and server (version 2.x or later)
from SSH Communication Security, and the free SSH2 and SCP2 implementation (version 2.5 or later)
from OpenSSH. The SFTP file transfer protocol is required for file transfer using SCP2.

Enabling SSH2 for Inbound Switch Access

Because SSH2 is currently under U.S. export restrictions, you must first obtain a security-enabled
version of the ExtremeWare software from Extreme Networks before you can enable SSH2. The
procedure for obtaining a security-enabled version of the ExtremeWare software is described in
"Security Licensing" on page 31.
You must enable SSH2 on the switch before you can connect to it using an external SSH2 client.
Enabling SSH2 involves two steps:
• Enabling SSH2 access, which may include specifying a list of clients that can access the switch, and
specifying a TCP port to be used for communication.
By default, if you have a security license, SSH2 is enabled using TCP port 22, with no restrictions on
client access.
ExtremeWare 7.2e Installation and User Guide
™
SSH2 server implementation.
®
SSH client products from Data Fellows
Secure Shell 2 (SSH2)
177