Effect Patch; Working With Patches; Patch Operations; Patch Initialization (Factory Reset) - Zoom R16 Operation Manual

Working with patches

After you have made many edits, you might want to restore pre-edited settings by initializing the
patch. This will return it to its factory preset condition.

Patch operations

For both insert and send return effects
Patch operation menus
Select an insert effect or send return

effect patch

Press either INSERT EFFECT or SEND RETURN
EFFECT and select a patch from an algorithm.
(Reference: OPERATION MANUAL P.48)
Patch editing and renaming (EDIT)
By adjusting the effect module parameters you can set
it to create the desired result. You can also change the
name.
(Reference: OPERATION MANUAL P.53)
Importing patches (IMPORT)
All algorithms (as well as reverb patches) from the effects
of the project selected on the R16 can be imported and
saved as a single patch.
(Reference: OPERATION MANUAL P.54)
*In the audio interface mode, one complete set of effect
data is saved for the mode. There are no project based
settings.
Saving patches (SAVE)
Adjusted patches can be saved.
(Reference: OPERATION MANUAL P. 53)
Initializing patches (INITIAL)
Restores patches to their original factory settings (only
available in audio interface mode).
HINT
Even if you have not imported patches the initial
settings of patches that were used in the recorder
mode can be used.

Patch initialization (factory reset)

EFFECT> select patch> PATCH INITIAL
1
or
Turn EFFECT On if Off
If "EFFECT Off" is displayed,
press [ENTER].
2
Select algorithm/patch.
C L E A N < I N 1 >
N o . 0 0 : S t a n d a r d
3
Press [
N o . 0 0 : S t a n d a r d
> E D I T
4
>PATCH INITIAL.
Select
Insert effect example
N o . 0 0 : S t a n d a r d
> P A T C H I N I T I A L
Send return effect (only reverb) example
N o . 0 0 : R E V E R B
> P A T C H I N I T I A L
Press [ENTER].
5
Confirm.
P A T C H
I n i t i a l ?
Press [ENTER].
Press
Change
menu
].
Change
menu
Change
menu
28