R16 Audio Interface System Environment; Create A New Audio Track - Zoom R16 Operation Manual

R16 audio interface system environment

To use DAW software with this unit, you need to install it and make settings in it for the R16. This is
an explanation for doing so with Cubase LE4.
R16 audio interface system
requirements
Windows
®
Windows XP SP2 or later/Windows
later
® ®
Pentium 4 or faster
1.8GHz Intel
1GB RAM minimum
Intel Mac
OS X 10.4.11 or later/10.5 or later
1.83GHz Intel Core Duo processor or faster
® TM
1GB RAM minimum
Both
USB 2.0 compatible port
* 64-bit operating systems are not supported.
* USB hubs are not supported.
About the screen images
The screen images are of the Windows version.
About trademarks
· The SD symbol and
® ®
· Windows /Windows Vista are trademarks or registered trademarks of Microsoft
® ®
· Macintosh , Mac OS and Logic are trademarks or registered trademarks of Apple Inc.
· Steinberg and Cubase are trademarks or registered trademarks of Steinberg Media Technologies GmbH Inc.
® ®
· Intel and Pentium are trademarks or registered trademarks of Intel Corporation.
®
· AMD Athlon is a trademark or registered trademark of Advanced Micro Devices, Inc.
· MACKIE Control is a trademark or registered trademark of LOUD Technologies.
· SONAR is a trademark or registered trademark of Cakewalk, Inc.
· Ableton Live is a trademark or registered trademark of Ableton AG.
· Digital Performer is a trademark or registered trademark of Mark of the Unicorn.
· All other trademarks, product names, and company names mentioned in this documentation are the property
of their respective owners.
· All trademarks and registered trademarks mentioned in this manual are for identification purposes only and are
not intended to infringe on the copyrighted properties of their respective owners.
®
Vista SP1 or
SDHC symbol are trademarks.
Cubase LE 4 installation guide
Please refer to the USB/Cubase LE 4 Startup Guide
for detailed instructions for installing the R16 audio
driver and Cubase LE 4.
Cubase LE 4 Startup Guide
Windows Vista / XP
This Cubase LE 4 Startup Guide explains how to install Cubase LE 4 on a computer, make connections and other settings for the R16.
To connect the R16 to a computer running Windows Vista Start InstallShield Wizard
(or Windows XP) and to enable audio input/output, proceed
as follows. The installation description uses Windows Vista
as an example.
Insert the supplied "Cubase LE 4" DVD-ROM into
the DVD drive of the computer.
Driver-Plug In selection screen
HINT
Ready to install the program
NOTE
"PDF Manuals and Drivers" CD-ROM supplied with R16
Drivers>Windows "Setup.exe"
or
Download the latest "ZOOM R16 Audio Driver" from
ZOOM homepage (http://zoom.co.jp)
and install it on a computer.
InstallShield Wizard was completed
[How to install the driver]
Set language selection
NOTE
®
.
Set and connect the R16 to the computer
using a USB cable.
How to set and connect the R16
1
Start "Found New hardware Wizard"
Press.
2
Select
Press.
3
Execute.
Press.
4
Select of how to continue settings.
Press.
5
Connect USB cable to the R16
6
"Found New Hardware Wizard completed"
Connect USB cable
to computer
Bring up the "Sound" window from the Control Panel
and make the input device setting for the computer.
R16
DAW software
NOTE
Continued overleaf
6