Sonar 7/8 - Zoom R16 Operation Manual

SONAR 7/8

Control surface setup
1
Choose option-controller/
surface menu to open the
controller/surface dialog.
If a controller/surface has already been selected,
click on the "Delete" button and delete the
controller/surface.
2
Click the "Add" button and open
the "Controller/Surface Setup"
dialog.
3
Choose "ZOOM R16" from
the drop-down menu of the
"Controller/surface" column.
Select "ZOOM R16" in the input/
output port column.
For Cakewalk SONAR, installation of a control
surface plug-in is necessary. Please install it when
installing the driver.
Function key setup
1
Choose "Option key bind" to
open the "Key bind" dialog.
2
Press "Search for the key" in
"Setup."
3
Select a function that you want
to assign an F1-F5 key to and
then press that key on the R16.
The above procedures are for Sonar 7.
The names of the menus might be different in a
different version of Sonar.
Please refer to the manual for the version of Sonar
that you are using for details.
HINT
The F1~F5 keys on the R16 are labeled as follows.
F1: [AUTO PUNCH IN/OUT] key
F2: [A-B REPEAT] key
F3: MARKER [|<<] key
F4: MARKER [>>|] key
F5: [MARK/CLEAR] key
30