Zoom R16 Operation Manual page 21

4
Raise the master channel fader
to a suitable playback level.
HINT
If no sound comes out after clicking the Play button
following recording, recheck the USB connection
settings (Step 6 above).
In addition, confirm that the [DIRECT/DAW
BALANCE] control is at the center.
Tips to improve
performance
When using Cubase LE 4, the application's
actions could become extremely delayed
o r e r r o r m e s s a g e s s u c h a s " c a n n o t
synchronize with USB audio interface" might
be displayed. Should such occurrences
become frequent, taking the following
measures might improve the situation.
➊ Terminate other running
programs.
I n p a r t i c u l a r, c o n f i r m t h a t t h e r e
are not a large number of background
applications running.
➋ Reduce the use of plug-ins in
Cubase LE 4 (effects, sound
generator plug-ins)
If there are a large number of plug-
ins running, the computer might be
struggling to keep up. In addition,
reducing the number of simultaneous
playback tracks might be effective.
➌ Use the R16 AC adapter
When devices draw power from the
USB bus, on rare occasions computer
performance can suffer. Try using the AC
adapter.
Please increase the Audio Buffer Size in the
Device Setup>VST Audio System menu if
the sound breaks up.
Please refer to Installation Guide Step 5 for
details.
Moreover, if the application performance
is extremely slow and regular computer
operation is affected, we recommend
disconnecting the computer from the R16
USB port and quitting Cubase LE 4 once
before reconnecting the USB port and
reopening Cubase LE 4 again.
20