Live 6/7 - Zoom R16 Operation Manual

Control surface setup for other DAWs

LIVE 6/7

Control surface setup
1
After starting Live 7, select
"Preferences" from the "Option"
(Windows) or "Live" (Mac) menu.
The Preferences window will open.
2
Click "MIDI" on the left side of
Preferences window.
The setup window related to MIDI will open.
3
Select "Mackie Control" in the
pull-down menu of the Control
Surface column.
4
Select "ZOOM R16" from the
pull-down menus of the Input
and Output column.
5
In the MIDI Ports section below,
turn "On" the Remote column
button for the "Input: Mackie
Control Input (Zoom R16)" item.
31
Function key setup
1
Press the MIDI button at the top
right of the main LIVE window to
open MIDI map mode.
2
Interface elements that can be
assigned will be highlighted in
blue. Click on the parameter that
you want to assign an F1~F5 key
to control.
3
Press the F1~F5 key of the R16
that you want to use to control
the selected parameter in Live.
The above procedures are for Live 7.
The names of the menus might be different in a
different version of Live.
Please refer to the manual for the version of Live
that you are using for details.
HINT
The F1~F5 keys on the R16 are labeled as follows.
F1: [AUTO PUNCH IN/OUT] key
F2: [A-B REPEAT] key
F3: MARKER [|<<] key
F4: MARKER [>>>|] key
F5: [MARK/CLEAR] key