Zoom R16 Operation Manual page 17

4
Set the save location and click
the OK button (select button on
Mac OS X).
The project file save location window is displayed.
This will create a new project and the Cubase LE
4 project window will appear.
Create a new audio track
5
Set-up the created audio track
as follows.
Inspector (area that allows setting of detailed
track information)
If the inspector is not shown, click
here to show/hide the inspector.
Select the track input/output bus.
The names of busses of the R16 connected by
USB will be displayed. To choose a different bus
click here and choose a different bus from the
menu.
To add a new audio track, select "Add Track" from
the "Project" menu and then choose "Audio" from
the sub-menu that appears.
NOTE
• Set the recording quantization (bit depth) of
Cubase LE 4 or the DAW software that you are
using to 24-bit in order to achieve the best audio
quality when recording. (See the software manual
for how to make this setting.)
• The inspector displays information about the
track currently selected. If it does not display
anything click on a track to see that track's
status.
16