Step 3: Overdubbing; 3-1: Select An Insert Effect Patch; 3-2: Select A Track, And Record - Zoom MRS-1044 Operation Manual

you want to re-record repeatedly over the same region, it
is convenient to use the auto punch-in/out function (→
p.33).
• By using V-takes (→ p.35) you can record a new take
while preserving the current take.
[Example staff: Rhythm guitar 2]

Step 3: Overdubbing

In this step you will record a rhythm guitar part (like the
example staff shown above) on track 2, while listening to
the rhythm guitar you recorded on track 1 in step 2 (as well
as the rhythm song). Recording additional parts in this way
is called "overdubbing."
N Preparations N
Load the project that you saved as the last operation
in Step 2-3. Alternatively, you can load the project
"Sample 2" (number 993), in which track 1 already
contains a rhythm guitar part recorded on track 1.
(For details on loading a project, refer to p.17.)

3-1: Select an insert effect patch

We will also apply an insert effect also to track 2 while
recording it.
Press the [EFFECT] key, and use the ALGORITHM
1
keys to select the desired insert effect algorithm.
As in step 2-2, press the [GUITAR/BASS] key to select the
GUITAR/BASS algorithm.
Turn the dial to select the desired patch.
2
For this example, select the patch named "Phaser" (number
7).
ZOOM MRS-1044
Press the [EXIT] key.
3
You will return to the main screen.

3-2: Select a track, and record

Next we will set the recording level, and record the rhythm
guitar on track 2.
While playing your instrument, turn the [REC
1
LEVEL] control to adjust the recording level.
With the recorder stopped, press status key 2
2
repeatedly to make the key light red.
Track 2 will be selected as the recording track.
Press the PLAY [ R ] key, and while listening to the
3
rhythm song, use fader 2 to adjust the monitor
level.
As necessary, use the DRUM/BASS faders and fader 1 to
adjust the volume balance of the rhythm song and track 1.
When you are finished adjusting the monitor levels, press
the STOP [ P ] key to stop the song.
Press the ZERO [ U ] key to return to the beginning
4
of the song.
Step 3: Overdubbing
23