Effect Mode Screens; Basic Steps For Using The Insert Effect; Selecting The Insert Effect Patch - Zoom Palmtop Studio PS-04 Operation Manual

Reference [Effects]
H
INT
The patches for the insert effect and send/
return effect are stored by project.

■ EFFECT mode screens

To make insert effect and send/return effect
settings, you must switch the PS-04 to EFFECT
mode by pressing the [EFFECT] key from the
AUDIO, RHYTHM, or SYSTEM mode. When you
switch to EFFECT mode, one of the following
screens will appear.
●
Insert effect top screen
This screen lets you select the insert effect patch.
Immediately after the screen is displayed, the name
of the currently selected algorithm is shown briefly,
and then the patch name appears.
STNDRD STNDRD
●
Send/return effect top screen
This screen lets you select the patch for the send/
return effect. Immediately after the screen is
displayed, the indication "SEND" is shown briefly,
and then the patch name appears.
LARGE LARGE
Pressing the [EFFECT] key while in EFFECT
mode toggles between the above two screens.
86
Basic steps for using the
insert effect
This section explains the steps for selecting an
insert effect patch and editing its contents.
■ Selecting the insert effect
patch
To switch the insert effect patch, proceed as
follows.
1.
Press the [EFFECT] key repeatedly to
bring up the insert effect top screen.
The currently selected patch is shown.
Patch name
STNDRD STNDRD
2.
Use the cursor up/down keys to
select the desired algorithm.
Shortly after selecting the algorithm, the patch
currently selected for that algorithm is shown.
N
OTE
The insert position of the insert effect will differ,
depending on the algorithm. (For details, see
page 84.)
3.
Turn the dial to select the patch.
When you select a new patch, its settings become
effective immediately.
H
INT
When the indication "EMPTY" is shown, you
have selected a blank patch. If such a patch is
selected, the insert effect will not be operating.
4.
To temporarily defeat the insert
effect, press the [TUNER/BYPASS]
key.
When you press the [TUNER/BYPASS] key in
EFFECT mode, the insert effect will be bypassed
and the built-in tuner function becomes active. (For
Patch number
ZOOM PS-04