Zoom R16 Operation Manual page 13

3
Press the MASTER track status key
to cycle through the functions of
the individual track status keys.
By pressing a track status key, you can
toggle solo, mute and record enable on
and off for the corresponding track.
S a m p l e R a t e = 4 8 . 0 k H z
s : S o l o
Each press of the
MASTER track key
changes the function in
mute>rec>solo
order.
R16 level meters
(audio interface use)
E a c h l eve l m e te r ot h e r
than the MASTER displays
t h e s i g n a l i m m e d i a te l y
before sending it to the
computer.
Checking DAW recording levels
By setting "REC SIGNAL" to "WET" (signal with
effect) or "DRY" (no effect), you can send signals
to the computer with or without being processed
by the R16's insert effects.
The recording levels of the sent signals are
displayed on the level meters. The signals shown
on the mastering level meter and each level meter
are different.
Red light
(clipping)
T h e m a ste r i n g l eve l
meter displays the re-
turning signal from the
computer.
Please adjust the
l e v e l m e t e r s o
that it does not
light the red clip
indicator.
12