Setting The Program Change Map - Boss GT-PRO Owner's Manual

Guitar effects processor
Hide thumbs Also See for GT-PRO:
Table of Contents

Advertisement

Chapter 7 Using the GT-PRO with External MIDI Devices Connected

Setting the Program Change Map

When switching patches using Program Change messages
transmitted by an external MIDI device, you can freely set
the correspondence between Program Change messages
received by the GT-PRO and the patches to be switched to in
the "Program Change Map."
Initial Program Change Map Settings
The program Change map set at the factory is shown below.
Program Change
Bank
Program
Select
Number
1
2
:
0
127
128
1
2
:
99
100
1
101
102
:
127
128
1
2
:
99
100
2
101
102
:
127
128
1
2
:
99
3
100
101
102
:
128
* When setting MIDI Omni Mode (p. 73) to "Omni Off," be
sure to have the MIDI RX Channel (p. 73) set beforehand to
the match the transmit channel of the external MIDI device.
Patch Number
U1-1
U1-2
:
U13-7
U13-8
U11-1
U11-2
:
U20-9
U20-10
P21-1
P21-2
:
P23-7
P23-8
P21-1
P21-2
:
P30-9
P30-10
P31-1
P31-2
:
P33-7
P33-8
P31-1
P32-2
:
P40-9
P40-10
P40-10
P40-10
:
P40-10
fig.07-0250
1. Press [SYSTEM] several times to display the MIDI
setting screen.
2. Press PARAMETER [
"Map Select" is displayed.
fig.07-0260d
3. Rotate the PATCH/VALUE dial to select "Prog."
* You cannot set the Program Change Map when "Fix" is
selected (it is not displayed).
* See next for more on "MID Map Select."
4. Press PARAMETER [
appears in the display.
fig.07-0270d
Bank Select
Program
Number
Number
5. Press PARAMETER [
and rotate the PATCH/VALUE dial to set the received
Program number and the corresponding patch number.
* Use this same procedure to select Bank Select Numbers.
* When using only Program Change messages to make program
changes, without using Bank Select messages, set the Program
number (1–128) when the Bank Select number is "0."
6. Repeat Step 5 as needed, setting patch numbers to their
corresponding Program numbers, until the Program
Change Map is completed.
7. Press [EXIT] to return to the Play screen.
3
2,5
1
7 4
] [
] so that
] until "Program Map"
Patch
Number
] [
] to move the cursor,
77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents