Driver Settings; About The Input And Output Devices - Boss GT-PRO Owner's Manual

Guitar effects processor
Hide thumbs Also See for GT-PRO:
Table of Contents

Advertisement

Driver settings

About the input and output devices

In order to get the best performance from the software you are using, you must choose the correct device settings.
The GT-PRO's audio driver supports WDM and ASIO 2.0.
Audio devices
Audio output device
Audio input device
ASIO device
MIDI devices
MIDI OUT
MIDI IN
* For details on how to make settings for your software, you should also refer to the owner's manual for your software.
* If you are unable to select the GT-PRO in the device settings of your software, it is possible that the GT-PRO driver was not installed
correctly. Please re-install the driver.
WDM
Use this if you are using the GT-PRO with the following applications or situations.
• Conventional applications such as Media Player
(for the settings, refer to "Input/output device settings" (p. 124))
• WDM driver mode compatible applications such as SONAR
• DirectSound compatible applications
ASIO
Use this if you are using the GT-PRO with an ASIO-compatible application such as Cubase. In the ASIO settings of your
application, choose "BOSS GT-PRO."
* To prevent audio loop feedback or double monitoring, turn monitoring off in your application, or set your application to use ASIO Direct
Monitor.
* When using the GT-PRO with ASIO, we recommend that you not set your application to use the Microsoft GS Wavetable SW Synth.
(This will decrease the processing load, and make it easier to change the driver buffer size.)
MME
Normally you should use WDM or ASIO.
Use this in the following cases when using an application that does not support WDM driver mode or ASIO.
• Recording or playing 24-bit data
BOSS GT-PRO
MME BOSS GT-PRO Out
BOSS GT-PRO
MME BOSS GT-PRO In
BOSS GT-PRO
BOSS GT-PRO Control
If you specify BOSS GT-PRO as the output port for the GT-PRO Editor/Librarian, sequencer soft-
ware, etc., you can control the GT-PRO using System Exclusive and other messages.
BOSS GT-PRO Control
If you specify BOSS GT-PRO as the input port for the GT-PRO Editor/Librarian, sequencer software,
etc., you can acquire data from the GT-PRO using System Exclusive and other messages.
Driver installation and settings (Windows)
WDM
MME
WDM
MME
ASIO
123

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents