Installing & Setup The Usb Driver - Boss GT-PRO Owner's Manual

Installing & Setup the USB Driver
In order to use the GT-PRO USB, you must first install the USB driver.
The USB Driver is included in the "GT-PRO Software CD-ROM."
■ What is USB Driver?
The USB Driver is software which passes data between the GT-PRO and the application (sequencer software
etc.) that is running on the USB-connected computer.
The GT-PRO Driver sends data from the application to the GT-PRO, and passes data from the GT-PRO to
the application.
The GT-PRO can receive and transmit both digital audio signals and MIDI messages.
Application
USB connector
USB
Driver
USB cable
Computer
GT-PRO
The explanation about installing and setup the driver is organized according to the computer and driver
mode that you are using. Please proceed to the following pages.
Driver installation and settings (Windows) ................................. (p. 110)
Driver installation and settings (Macintosh) ............................... (p. 126)
109