Boss GT-PRO Owner's Manual page 137

fig.12-0380
8
In the Output tab, set the Choose a device for sound output to "GT-PRO."
fig.12-0390
9
In the Input tab, set the Choose a device for sound input to "GT-PRO."
fig.12-0400
Cautions when using the GT-PRO
Before you use your software, please note the following points.
• Select "GT-PRO" in the audio driver setting of your software. For details, refer to the
manual that came with your software.
• Connect the GT-PRO to your computer via a USB cable before you start up your
sequencer or other software.
• Do not disconnect the USB cable from the GT-PRO while your sequencer or other
software is running.
• Disconnect the USB cable from the GT-PRO only after you have quit your sequencer or
other software.
• Leave the Sleep function of your Macintosh turned off.
• The GT-PRO will not work in the Classic environment of Mac OS X. Use the GT-PRO
when the Classic environment is not running.
Driver installation and settings (Macintosh)
The "Main Volume" slider will
not move.
137