Boss GT-PRO Owner's Manual page 68

Chapter 6 Using Pedals to Control the Effects
Value Explanation
Patch Bank Inc
Switches to the next higher bank number.
Patch Bank Dec
Switches to the next lower bank number.
* Although you can set this so that the same target is controlled
by more than one controller, in such cases, make sure not to
have different sources changing the parameter at the same
time. Changing the parameter simultaneously using different
sources may result in noise being generated.
When setting the target, you can search for the desired
target more rapidly by pressing [SHIFT], causing the
indicator to light, and then rotating the PATCH/VALUE
dial.
To return to the normal mode, press [SHIFT] once again
so the indicator goes out.
Target Range
fig.06-0160d
The value of the parameter selected as the target changes
within the range defined by "Min" and "Max," as set on the
GT-PRO.
When using an external foot switch, or other controller that
acts as an on/off switch, "Min" is selected with Off
(CLOSED), and "Max" is selected with On (OPEN).
When using an external expression pedal or other controller
that generates a consecutive change in the value, the value of
the setting changes accordingly, within the range set by the
minimum and maximum values.
Also, when the target is of an on/off type, the median value
of the received data is used as the dividing line in
determining whether to switch it on or off.
68
When using the foot switch:
fig.06-0170
Amount of change in
parameter value
maximum value
Target Max
minimum value
Target Min
Release
When using the EXP pedal:
fig.06-0180
maximum value
Target Max
minimum value
Target Min
When the pedal
is fully raised
When controlling the On/Off target with the
EXP pedal:
fig.06-0190
On
Target Max
Off
Off
Target Min
When the pedal
When the pedal
is advanced halfway
is fully raised
EXP Pedal
* The range that can be selected changes according to the target
setting.
* When the "minimum" is set to a higher value than the
"maximum," the change in the parameter is reversed.
* The values of settings can change if the target is changed after
the "minimum" and "maximum" settings have been made. If
you've changed the target, be sure to recheck the "minimum"
and "maximum" settings.
Off On
Depress
Foot Switch
When the pedal
is fully advanced
EXP Pedal
On
When the pedal
is fully advanced